YM2KV-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM2KV-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RSSI*	Voltage*
1785048909	20 Pkt	-38 dBm	12.45 V
1785048281	26 Pkt	-38 dBm	12.45 V
1785047651	25 Pkt	-39 dBm	12.45 V
1785047023	22 Pkt	-39 dBm	12.45 V
1785046407	17 Pkt	-39 dBm	12.45 V
1785045767	16 Pkt	-38 dBm	12.45 V
1785045139	17 Pkt	-38 dBm	12.45 V
1785044512	15 Pkt	-39 dBm	12.45 V
1785043886	16 Pkt	-39 dBm	12.45 V
1785043259	13 Pkt	-38 dBm	12.45 V
1785042632	12 Pkt	-38 dBm	12.45 V
1785042006	10 Pkt	-38 dBm	12.45 V
1785041381	12 Pkt	-38 dBm	12.45 V
1785040756	11 Pkt	-38 dBm	12.45 V
1785040130	16 Pkt	-39 dBm	12.45 V
1785039503	12 Pkt	-38 dBm	12.45 V
1785038877	7 Pkt	-39 dBm	12.45 V
1785038254	10 Pkt	-38 dBm	12.45 V
1785037628	14 Pkt	-39 dBm	12.45 V
1785037000	14 Pkt	-38 dBm	12.45 V
1785036373	15 Pkt	-38 dBm	12.45 V
1785035747	14 Pkt	-39 dBm	12.45 V
1785035120	13 Pkt	-38 dBm	12.45 V
1785034495	17 Pkt	-38 dBm	12.45 V
1785033868	12 Pkt	-38 dBm	12.45 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)