W8AGT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W8AGT. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1776707123	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	0 count/10m	3 count/10m
1776705923	0.01 Rx Erlang	0.01 Tx Erlang	10 count/10m	0 count/10m	3 count/10m
1776704723	0.01 Rx Erlang	0 Tx Erlang	6 count/10m	0 count/10m	2 count/10m
1776703523	0.01 Rx Erlang	0.01 Tx Erlang	11 count/10m	0 count/10m	4 count/10m
1776702323	0.01 Rx Erlang	0 Tx Erlang	12 count/10m	0 count/10m	3 count/10m
1776701123	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	0 count/10m	2 count/10m
1776699923	0.01 Rx Erlang	0.01 Tx Erlang	10 count/10m	0 count/10m	3 count/10m
1776698723	0.01 Rx Erlang	0 Tx Erlang	7 count/10m	0 count/10m	2 count/10m
1776697523	0.01 Rx Erlang	0 Tx Erlang	8 count/10m	0 count/10m	3 count/10m
1776696323	0.01 Rx Erlang	0 Tx Erlang	7 count/10m	0 count/10m	3 count/10m
1776695123	0.01 Rx Erlang	0.01 Tx Erlang	12 count/10m	0 count/10m	3 count/10m
1776693923	0.01 Rx Erlang	0 Tx Erlang	8 count/10m	0 count/10m	3 count/10m
1776692723	0.01 Rx Erlang	0.01 Tx Erlang	9 count/10m	0 count/10m	4 count/10m
1776691523	0.01 Rx Erlang	0 Tx Erlang	10 count/10m	0 count/10m	3 count/10m
1776690323	0.01 Rx Erlang	0 Tx Erlang	8 count/10m	0 count/10m	3 count/10m
1776689123	0.02 Rx Erlang	0.01 Tx Erlang	18 count/10m	0 count/10m	6 count/10m
1776687923	0.01 Rx Erlang	0 Tx Erlang	13 count/10m	1 count/10m	3 count/10m
1776686723	0.01 Rx Erlang	0 Tx Erlang	12 count/10m	0 count/10m	2 count/10m
1776685523	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	0 count/10m	6 count/10m
1776684323	0.02 Rx Erlang	0.01 Tx Erlang	14 count/10m	1 count/10m	4 count/10m
1776683123	0.03 Rx Erlang	0 Tx Erlang	19 count/10m	0 count/10m	4 count/10m
1776681923	0.02 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	4 count/10m
1776680723	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	0 count/10m	2 count/10m
1776679523	0.01 Rx Erlang	0 Tx Erlang	6 count/10m	0 count/10m	2 count/10m
1776678323	0.01 Rx Erlang	0 Tx Erlang	7 count/10m	0 count/10m	3 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)