LA6ODA-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LA6ODA-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Celsius*	Rel_Hum*	Atm_Press*
1787480856	19	58.48	1025.38
1787480396	17.8	61.18	1022.25
1787479741	17.3	60.42	1021.88
1787477648	17	57.42	1020.5
1787477042	17.5	58.2	1020.63
1787476129	18.1	59.54	1021.38
1787475478	17.6	60.82	1021.75
1787474831	17.8	57.23	1022.88
1787474207	21.1	57.8	1022
1787204363	26.4	54.36	997.13
1787201734	21.1	62.68	999.75
1787147329	23	55.75	1000.38
1787146181	22.8	54.07	999.88
1787143620	23.6	49.36	999.38
1787142972	26	47.69	998.88
1787141120	25.7	50.48	1003
1787139664	24.6	56.65	998.5
1787051481	21.9	55.36	1006.88
1787050347	24.1	56.22	1008.75
1787049635	24.2	57.4	999.13
1787040913	28	48.3	1005.38
1787035575	29.7	46.9	1004.38
1786985374	15	67.94	1019
1786982565	23.1	47.75	1011.75
1786981905	27.2	41.3	1014.5

*Used Equation Coefficients:

Celsius: 0, 0.1, -50

Rel_Hum: 0, 0.01, 0

Atm_Press: 0, 0.125, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)