SR9KRT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR9KRT. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*
1787568563	116 Count	1051 Count	106 Count	4.17 VDC
1787567662	105 Count	939 Count	96 Count	4.2 VDC
1787566761	93 Count	810 Count	85 Count	4.23 VDC
1787565859	86 Count	691 Count	79 Count	4.19 VDC
1787564958	76 Count	608 Count	70 Count	4.25 VDC
1787564057	67 Count	528 Count	62 Count	4.24 VDC
1787563156	53 Count	446 Count	49 Count	4.2 VDC
1787562255	43 Count	369 Count	40 Count	4.19 VDC
1787561353	33 Count	288 Count	31 Count	4.23 VDC
1787560452	22 Count	181 Count	21 Count	4.22 VDC
1787559551	8 Count	94 Count	8 Count	4.2 VDC
1787558650	126 Count	1059 Count	113 Count	4.2 VDC
1787557749	112 Count	967 Count	100 Count	4.23 VDC
1787556847	102 Count	875 Count	91 Count	4.18 VDC
1787555946	91 Count	760 Count	81 Count	4.21 VDC
1787555045	79 Count	656 Count	70 Count	4.25 VDC
1787554144	65 Count	552 Count	57 Count	4.23 VDC
1787553242	50 Count	439 Count	43 Count	4.23 VDC
1787552341	35 Count	341 Count	29 Count	4.18 VDC
1787551437	22 Count	235 Count	17 Count	4.21 VDC
1787550536	10 Count	118 Count	6 Count	4.2 VDC
1787549663	87 Count	1010 Count	79 Count	4.2 VDC
1787548762	76 Count	893 Count	69 Count	4.19 VDC
1787547861	69 Count	775 Count	63 Count	4.21 VDC
1787546960	61 Count	678 Count	56 Count	4.24 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)