DC1MPP-7 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DC1MPP-7. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Humi*	Baro*
1787585829	23.8 deg C	55.3 %	1015.7 hPa
1787584934	23.7 deg C	56.8 %	1015.9 hPa
1787584036	23.7 deg C	57.8 %	1016.2 hPa
1787583140	23.6 deg C	57.3 %	1016.4 hPa
1787582240	23.6 deg C	57.8 %	1016.8 hPa
1787581335	23.5 deg C	57.8 %	1016.9 hPa
1787580432	23.4 deg C	57.3 %	1016.9 hPa
1787579533	23.2 deg C	58.1 %	1017.1 hPa
1787578631	23.1 deg C	58.2 %	1017.2 hPa
1787577734	22.9 deg C	57.8 %	1017.3 hPa
1787576834	22.7 deg C	58.1 %	1017.6 hPa
1787575928	22.5 deg C	54.6 %	1017.8 hPa
1787575029	22.4 deg C	58.3 %	1018 hPa
1787574132	22.2 deg C	58.4 %	1018.2 hPa
1787573229	22 deg C	57.9 %	1018.4 hPa
1787572330	21.8 deg C	57.8 %	1018.6 hPa
1787571426	21.6 deg C	59.1 %	1018.7 hPa
1787570525	21.4 deg C	58.7 %	1018.9 hPa
1787566927	20.6 deg C	60.6 %	1019.6 hPa
1787566023	20.4 deg C	61.5 %	1019.8 hPa
1787565119	20.1 deg C	61.7 %	1020 hPa
1787564224	19.7 deg C	61.6 %	1020.1 hPa
1787563320	19.4 deg C	62.3 %	1020.4 hPa
1787562421	19.1 deg C	63 %	1020.5 hPa
1787561518	18.7 deg C	63.6 %	1020.6 hPa

*Used Equation Coefficients:

Temp: 0, 0.1, 0

Humi: 0, 0.1, 0

Baro: 0, 0.1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)