W3TM-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W3TM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1781398434	49 Pkts	47 Pkts	5 Pkts	5 C
1781394834	49 Pkts	48 Pkts	8 Pkts	5 C
1781391234	58 Pkts	56 Pkts	15 Pkts	5 C
1781387634	73 Pkts	71 Pkts	31 Pkts	5 C
1781384034	59 Pkts	57 Pkts	21 Pkts	5 C
1781380434	53 Pkts	51 Pkts	11 Pkts	5 C
1781376834	62 Pkts	61 Pkts	13 Pkts	5 C
1781373234	65 Pkts	64 Pkts	13 Pkts	5 C
1781369634	80 Pkts	79 Pkts	16 Pkts	5 C
1781366034	81 Pkts	79 Pkts	20 Pkts	5 C
1781362434	86 Pkts	83 Pkts	21 Pkts	5 C
1781358834	71 Pkts	68 Pkts	23 Pkts	5 C
1781355234	78 Pkts	76 Pkts	20 Pkts	5 C
1781351634	84 Pkts	81 Pkts	16 Pkts	4 C
1781348034	76 Pkts	73 Pkts	18 Pkts	5 C
1781344434	77 Pkts	74 Pkts	15 Pkts	5 C
1781340834	67 Pkts	67 Pkts	14 Pkts	5 C
1781337234	61 Pkts	59 Pkts	11 Pkts	5 C
1781333634	59 Pkts	58 Pkts	8 Pkts	5 C
1781330034	74 Pkts	72 Pkts	11 Pkts	5 C
1781326435	51 Pkts	50 Pkts	7 Pkts	5 C
1781322834	46 Pkts	46 Pkts	9 Pkts	5 C
1781319234	62 Pkts	61 Pkts	8 Pkts	5 C
1781315634	54 Pkts	53 Pkts	5 Pkts	5 C
1781312034	56 Pkts	55 Pkts	11 Pkts	5 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)