DA0WW-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DA0WW-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Batt12V*	Batt48V*	Umin*	Cell#*
1787598939	12.9 V	48 V	1 V	1 #
1787598902	12.9 V	48 V	1 V	1 #
1787598867	12.9 V	48 V	1 V	1 #
1787598831	12.9 V	48 V	1 V	1 #
1787598795	12.9 V	48 V	1 V	1 #
1787598759	12.9 V	48 V	1 V	1 #
1787598723	12.9 V	48 V	1 V	1 #
1787598687	12.9 V	48 V	1 V	1 #
1787598650	12.9 V	48 V	1 V	1 #
1787598616	12.9 V	48 V	1 V	1 #
1787598578	12.9 V	48 V	1 V	1 #
1787598525	12.9 V	48 V	1 V	1 #
1787598489	12.9 V	48 V	1 V	1 #
1787598452	12.9 V	48 V	1 V	1 #
1787598417	12.9 V	48 V	1 V	1 #
1787598381	12.9 V	48 V	1 V	1 #
1787598345	12.9 V	48 V	1 V	1 #
1787598308	12.9 V	48 V	1 V	1 #
1787598273	12.9 V	48 V	1 V	1 #
1787598237	12.9 V	48 V	1 V	1 #
1787598201	12.9 V	48 V	1 V	1 #
1787598164	12.9 V	48 V	1 V	1 #
1787598129	12.9 V	48 V	1 V	1 #
1787598093	12.9 V	48 V	1 V	1 #
1787598057	12.9 V	48 V	1 V	1 #

*Used Equation Coefficients:

Batt12V: 0, 0.1, 0

Batt48V: 0, 0.2, 0

I48V: 0, 1, 0

Umin: 0, 0, 1

Cell#: 0, 0, 1

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)