DA0WW-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DA0WW-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RHout*	Tout*	RHin*	Tin*
1787598941	58 %	28 C	52 %	25 C
1787598904	58 %	28 C	52 %	25 C
1787598869	58 %	28 C	52 %	25 C
1787598832	58 %	28 C	52 %	25 C
1787598797	58 %	28 C	52 %	25 C
1787598761	58 %	28 C	52 %	25 C
1787598725	58 %	28 C	52 %	25 C
1787598689	58 %	28 C	52 %	25 C
1787598653	58 %	28 C	52 %	25 C
1787598616	58 %	28 C	52 %	25 C
1787598581	58 %	28 C	52 %	25 C
1787598527	58 %	28 C	52 %	25 C
1787598491	58 %	28 C	52 %	25 C
1787598454	58 %	28 C	52 %	25 C
1787598419	58 %	28 C	52 %	25 C
1787598383	58 %	28 C	52 %	25 C
1787598346	58 %	28 C	52 %	25 C
1787598312	58 %	28 C	52 %	25 C
1787598275	58 %	28 C	52 %	25 C
1787598239	58 %	28 C	52 %	25 C
1787598203	58 %	28 C	52 %	25 C
1787598166	58 %	28 C	52 %	25 C
1787598131	58 %	28 C	52 %	25 C
1787598095	58 %	28 C	52 %	25 C
1787598059	58 %	28 C	52 %	25 C

*Used Equation Coefficients:

RHout: 0, 1, 0

Tout: 0, 1, -100

RHin: 0, 1, 0

Tin: 0, 1, -100

Fan: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)