W9BED-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W9BED-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1787541908	85 Pkts	82 Pkts	50 Pkts	12 C
1787538308	130 Pkts	125 Pkts	56 Pkts	12 C
1787534708	90 Pkts	87 Pkts	67 Pkts	12 C
1787531108	91 Pkts	89 Pkts	77 Pkts	13 C
1787527508	86 Pkts	83 Pkts	63 Pkts	14 C
1787523908	75 Pkts	72 Pkts	54 Pkts	15 C
1787520308	51 Pkts	49 Pkts	43 Pkts	16 C
1787516708	78 Pkts	76 Pkts	71 Pkts	17 C
1787513108	127 Pkts	124 Pkts	107 Pkts	16 C
1787509508	116 Pkts	113 Pkts	99 Pkts	17 C
1787505908	84 Pkts	82 Pkts	75 Pkts	16 C
1787502307	84 Pkts	82 Pkts	74 Pkts	15 C
1787498707	158 Pkts	151 Pkts	66 Pkts	14 C
1787495109	193 Pkts	185 Pkts	65 Pkts	12 C
1787491507	170 Pkts	162 Pkts	58 Pkts	11 C
1787487907	187 Pkts	181 Pkts	61 Pkts	10 C
1787484307	173 Pkts	171 Pkts	60 Pkts	11 C
1787480707	140 Pkts	137 Pkts	67 Pkts	11 C
1787477108	148 Pkts	146 Pkts	70 Pkts	11 C
1787473507	126 Pkts	119 Pkts	55 Pkts	12 C
1787469907	136 Pkts	131 Pkts	63 Pkts	12 C
1787466307	112 Pkts	104 Pkts	57 Pkts	12 C
1787462707	81 Pkts	78 Pkts	47 Pkts	12 C
1787459107	65 Pkts	61 Pkts	42 Pkts	12 C
1787455507	79 Pkts	76 Pkts	60 Pkts	13 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)