HB9IQZ-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HB9IQZ-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1787586685	0 Count	749 Count	0 Count	0 VDC	0 VDC
1787584885	0 Count	720 Count	0 Count	0 VDC	0 VDC
1787583085	0 Count	698 Count	0 Count	0 VDC	0 VDC
1787581285	0 Count	680 Count	0 Count	0 VDC	0 VDC
1787579485	0 Count	679 Count	0 Count	0 VDC	0 VDC
1787577685	0 Count	672 Count	0 Count	0 VDC	0 VDC
1787575885	0 Count	663 Count	0 Count	0 VDC	0 VDC
1787574085	0 Count	661 Count	0 Count	0 VDC	0 VDC
1787572285	0 Count	659 Count	0 Count	0 VDC	0 VDC
1787570485	0 Count	658 Count	0 Count	0 VDC	0 VDC
1787568685	0 Count	648 Count	0 Count	0 VDC	0 VDC
1787566885	0 Count	625 Count	0 Count	0 VDC	0 VDC
1787565085	0 Count	603 Count	0 Count	0 VDC	0 VDC
1787563285	0 Count	579 Count	0 Count	0 VDC	0 VDC
1787561485	0 Count	557 Count	0 Count	0 VDC	0 VDC
1787559685	0 Count	533 Count	0 Count	0 VDC	0 VDC
1787557885	0 Count	507 Count	0 Count	0 VDC	0 VDC
1787556085	0 Count	482 Count	0 Count	0 VDC	0 VDC
1787554285	0 Count	453 Count	0 Count	0 VDC	0 VDC
1787552485	0 Count	425 Count	0 Count	0 VDC	0 VDC
1787550685	0 Count	395 Count	0 Count	0 VDC	0 VDC
1787548885	0 Count	377 Count	0 Count	0 VDC	0 VDC
1787547085	0 Count	360 Count	0 Count	0 VDC	0 VDC
1787545285	0 Count	319 Count	0 Count	0 VDC	0 VDC
1787543485	0 Count	289 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)