SP8ETM-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP8ETM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RX1h*	Stations24h*	ODX24h*	Direct24h*	Gated1h*
1787545546	106 Pkt	18 Count	17 km	8 Count	34 Pkt
1787543748	100 Pkt	18 Count	17 km	8 Count	36 Pkt
1787541943	128 Pkt	18 Count	17 km	8 Count	63 Pkt
1787540143	156 Pkt	18 Count	17 km	8 Count	85 Pkt
1787538343	120 Pkt	18 Count	17 km	8 Count	55 Pkt
1787536543	96 Pkt	18 Count	17 km	8 Count	35 Pkt
1787534743	100 Pkt	18 Count	17 km	8 Count	39 Pkt
1787532943	152 Pkt	18 Count	17 km	8 Count	54 Pkt
1787531143	220 Pkt	18 Count	17 km	8 Count	78 Pkt
1787529342	172 Pkt	18 Count	17 km	8 Count	65 Pkt
1787525733	112 Pkt	18 Count	17 km	8 Count	42 Pkt
1787523933	104 Pkt	18 Count	17 km	8 Count	39 Pkt
1787522132	96 Pkt	18 Count	17 km	8 Count	31 Pkt
1787520332	96 Pkt	18 Count	17 km	8 Count	37 Pkt
1787518532	102 Pkt	19 Count	17 km	8 Count	44 Pkt
1787516732	104 Pkt	19 Count	17 km	8 Count	45 Pkt
1787514932	104 Pkt	19 Count	17 km	8 Count	42 Pkt
1787513132	112 Pkt	19 Count	17 km	8 Count	45 Pkt
1787511332	114 Pkt	19 Count	17 km	8 Count	43 Pkt
1787509531	108 Pkt	19 Count	17 km	8 Count	38 Pkt
1787507735	100 Pkt	19 Count	17 km	8 Count	36 Pkt
1787505931	104 Pkt	19 Count	17 km	9 Count	36 Pkt
1787504131	104 Pkt	21 Count	17 km	9 Count	34 Pkt
1787502331	112 Pkt	21 Count	17 km	9 Count	26 Pkt
1787500530	116 Pkt	21 Count	17 km	9 Count	26 Pkt

*Used Equation Coefficients:

RX1h: 0, 2, 0

Stations24h: 0, 1, 0

ODX24h: 0, 1, 0

Direct24h: 0, 1, 0

Gated1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)