KH6UU-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KH6UU-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Temp*	Value3*
1773263790	453 Volts	632 Deg.F	241
1773263716	453 Volts	626 Deg.F	258
1773263584	423 Volts	619 Deg.F	283
1773263501	459 Volts	617 Deg.F	291
1773263496	461 Volts	617 Deg.F	291
1773263464	451 Volts	616 Deg.F	293
1773263458	458 Volts	616 Deg.F	296
1773263440	451 Volts	615 Deg.F	300
1773263419	442 Volts	615 Deg.F	301
1773262508	405 Volts	614 Deg.F	305
1773260708	447 Volts	615 Deg.F	477
1773260686	447 Volts	613 Deg.F	294
1773260640	455 Volts	612 Deg.F	291
1773260621	446 Volts	612 Deg.F	293
1773260572	455 Volts	611 Deg.F	298
1773260567	458 Volts	611 Deg.F	477
1773260533	457 Volts	611 Deg.F	301
1773260443	438 Volts	610 Deg.F	300
1773260388	452 Volts	609 Deg.F	302
1773260277	456 Volts	609 Deg.F	306
1773260034	462 Volts	602 Deg.F	309
1773260025	452 Volts	602 Deg.F	310
1772832156	438 Volts	632 Deg.F	273
1772832134	445 Volts	632 Deg.F	274
1772831825	453 Volts	631 Deg.F	279

*Used Equation Coefficients:

Battery: 0, 1, 0

Temp: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)