KG5BQX-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KG5BQX-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Temp*	Value3*
1787543036	13.36 Volts	102.65 DegF	243
1787542984	13.39 Volts	102.65 DegF	241
1787542909	13.27 Volts	102.65 DegF	245
1787542819	13.27 Volts	104.41 DegF	241
1787542730	13.48 Volts	104.41 DegF	239
1787542639	13.57 Volts	105.29 DegF	238
1787542514	13.42 Volts	106.17 DegF	239
1787542477	13.45 Volts	106.17 DegF	238
1787542454	13.36 Volts	106.17 DegF	239
1787542402	13.27 Volts	107.05 DegF	241
1787542390	13.27 Volts	106.17 DegF	238
1787542302	13.45 Volts	107.05 DegF	238
1787542210	13.62 Volts	106.17 DegF	242
1787542201	13.8 Volts	106.17 DegF	244
1787542200	13.71 Volts	105.29 DegF	244
1787542200	13.83 Volts	105.29 DegF	246
1787542199	13.68 Volts	105.29 DegF	244
1787542199	13.68 Volts	104.41 DegF	242
1787542199	13.71 Volts	104.41 DegF	244
1787542198	13.74 Volts	104.41 DegF	245
1787542198	13.98 Volts	104.41 DegF	243
1787542198	13.89 Volts	104.41 DegF	244
1787542197	13.8 Volts	103.53 DegF	351
1787541982	13.89 Volts	102.65 DegF	247
1787541974	13.92 Volts	102.65 DegF	248

*Used Equation Coefficients:

Battery: 0, 0.0293, 0

Temp: 0, 0.88, -459.67

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)