WP4PEG-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WP4PEG-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Charging/AC*	GPS+Sat*
1787539913	100 Percent	48 Charge/On/Off	2 Sats/On/Off
1787539013	100 Percent	48 Charge/On/Off	2 Sats/On/Off
1787538953	99 Percent	95 Charge/On/Off	2 Sats/On/Off
1787538593	98 Percent	95 Charge/On/Off	2 Sats/On/Off
1787538293	97 Percent	95 Charge/On/Off	2 Sats/On/Off
1787537993	96 Percent	95 Charge/On/Off	2 Sats/On/Off
1787537753	95 Percent	95 Charge/On/Off	2 Sats/On/Off
1787537513	94 Percent	95 Charge/On/Off	2 Sats/On/Off
1787537333	93 Percent	95 Charge/On/Off	2 Sats/On/Off
1787537153	92 Percent	95 Charge/On/Off	2 Sats/On/Off
1787536973	91 Percent	95 Charge/On/Off	2 Sats/On/Off
1787536960	90 Percent	95 Charge/On/Off	2 Sats/On/Off
1787536733	89 Percent	95 Charge/On/Off	2 Sats/On/Off
1787536553	88 Percent	95 Charge/On/Off	2 Sats/On/Off
1787536493	87 Percent	95 Charge/On/Off	2 Sats/On/Off
1787536373	86 Percent	95 Charge/On/Off	2 Sats/On/Off
1787536253	85 Percent	95 Charge/On/Off	2 Sats/On/Off
1787536133	84 Percent	95 Charge/On/Off	2 Sats/On/Off
1787536073	83 Percent	95 Charge/On/Off	2 Sats/On/Off
1787535953	82 Percent	95 Charge/On/Off	2 Sats/On/Off
1787535893	81 Percent	95 Charge/On/Off	2 Sats/On/Off
1787535833	80 Percent	95 Charge/On/Off	2 Sats/On/Off
1787535713	79 Percent	95 Charge/On/Off	2 Sats/On/Off
1787535653	78 Percent	95 Charge/On/Off	2 Sats/On/Off
1787535593	77 Percent	95 Charge/On/Off	2 Sats/On/Off

*Used Equation Coefficients:

Battery: 0, 1, 0

Charging/AC: 0, 1, 0

GPS+Sat: 0, 1, 0

Current: 0, 10, -1280

A5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)