This is the latest recevied telemetry packets stored in our database for station/object DL9DP-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Press*
Temp.in*
Hum*
QNH*
Temp.out*
1788706910
1020.2 hPa
24.4 C deg
33.6 %
1024.7 hPa
0 C deg
1788705080
1020.5 hPa
24.1 C deg
36.9 %
1025 hPa
0 C deg
1788703250
1020.5 hPa
24.6 C deg
33.6 %
1024.9 hPa
0 C deg
1788701420
1020.6 hPa
24.6 C deg
35.1 %
1025.1 hPa
0 C deg
1788699590
1020.6 hPa
22.6 C deg
36.9 %
1025.1 hPa
0 C deg
1788697760
1020.8 hPa
23.1 C deg
36 %
1025.2 hPa
0 C deg
1788695930
1020.8 hPa
23.5 C deg
35.5 %
1025.3 hPa
0 C deg
1788694099
1020.9 hPa
22.1 C deg
41.8 %
1025.4 hPa
0 C deg
1788692269
1020.7 hPa
23.8 C deg
36 %
1025.1 hPa
0 C deg
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)