N1KAB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N1KAB-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	V2*	Temp*	RFIn*	RFiGate*
1787552555	12.8 V	44 C	2 Pkts	2 Pkts
1787550755	12.8 V	44 C	7 Pkts	7 Pkts
1787548955	12.8 V	44 C	5 Pkts	5 Pkts
1787547155	12.8 V	45 C	4 Pkts	4 Pkts
1787545355	12.9 V	45 C	6 Pkts	6 Pkts
1787543555	12.9 V	46 C	9 Pkts	9 Pkts
1787541755	12.9 V	46 C	7 Pkts	7 Pkts
1787539955	12.9 V	46 C	8 Pkts	8 Pkts
1787538155	12.9 V	46 C	5 Pkts	5 Pkts
1787536355	13 V	46 C	5 Pkts	5 Pkts
1787534555	13 V	47 C	7 Pkts	7 Pkts
1787532755	13 V	47 C	4 Pkts	4 Pkts
1787530955	13.3 V	47 C	1 Pkts	1 Pkts
1787529155	14 V	47 C	2 Pkts	2 Pkts
1787527355	15.1 V	47 C	1 Pkts	1 Pkts
1787525555	13.9 V	47 C	4 Pkts	4 Pkts
1787523755	13.5 V	47 C	1 Pkts	1 Pkts
1787521955	13.4 V	47 C	5 Pkts	5 Pkts
1787520155	13.5 V	47 C	2 Pkts	2 Pkts
1787518355	13.6 V	47 C	3 Pkts	3 Pkts
1787516555	13.4 V	47 C	3 Pkts	3 Pkts
1787514755	13.5 V	46 C	4 Pkts	4 Pkts
1787512955	13.5 V	47 C	4 Pkts	4 Pkts
1787511155	13.4 V	46 C	10 Pkts	10 Pkts
1787509355	13.5 V	46 C	1 Pkts	1 Pkts

*Used Equation Coefficients:

V2: 0, 0.1, 0

Temp: 0, 1, 0

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)