SP2SGQ-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP2SGQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1762971484	942 Count	0 Count	0 Count	0 VDC	0 VDC
1762971318	941 Count	0 Count	0 Count	0 VDC	0 VDC
1762970584	940 Count	0 Count	0 Count	0 VDC	0 VDC
1762970583	941 Count	0 Count	0 Count	0 VDC	0 VDC
1762969682	940 Count	0 Count	0 Count	0 VDC	0 VDC
1762968782	939 Count	0 Count	0 Count	0 VDC	0 VDC
1762967880	938 Count	0 Count	0 Count	0 VDC	0 VDC
1762967716	937 Count	0 Count	0 Count	0 VDC	0 VDC
1762966981	936 Count	0 Count	0 Count	0 VDC	0 VDC
1762966980	937 Count	0 Count	0 Count	0 VDC	0 VDC
1762966117	936 Count	0 Count	0 Count	0 VDC	0 VDC
1762965917	935 Count	0 Count	0 Count	0 VDC	0 VDC
1762964278	934 Count	0 Count	0 Count	0 VDC	0 VDC
1762964124	933 Count	0 Count	0 Count	0 VDC	0 VDC
1762963394	933 Count	0 Count	0 Count	0 VDC	0 VDC
1762963394	932 Count	0 Count	0 Count	0 VDC	0 VDC
1762962477	932 Count	0 Count	0 Count	0 VDC	0 VDC
1762962322	931 Count	0 Count	0 Count	0 VDC	0 VDC
1762961577	930 Count	0 Count	0 Count	0 VDC	0 VDC
1762961576	931 Count	0 Count	0 Count	0 VDC	0 VDC
1762960696	930 Count	0 Count	0 Count	0 VDC	0 VDC
1762959775	929 Count	0 Count	0 Count	0 VDC	0 VDC
1762958722	927 Count	0 Count	0 Count	0 VDC	0 VDC
1762957974	926 Count	0 Count	0 Count	0 VDC	0 VDC
1762956920	925 Count	0 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)