SM6UMX-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SM6UMX-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1788559477	32 Count	0 Count	0 Count	0 VDC	0 VDC
1788558576	31 Count	0 Count	0 Count	0 VDC	0 VDC
1788557676	30 Count	0 Count	0 Count	0 VDC	0 VDC
1788556775	29 Count	0 Count	0 Count	0 VDC	0 VDC
1788555875	28 Count	0 Count	0 Count	0 VDC	0 VDC
1788554974	27 Count	0 Count	0 Count	0 VDC	0 VDC
1788554073	26 Count	0 Count	0 Count	0 VDC	0 VDC
1788553173	25 Count	0 Count	0 Count	0 VDC	0 VDC
1788552272	24 Count	0 Count	0 Count	0 VDC	0 VDC
1788551372	23 Count	0 Count	0 Count	0 VDC	0 VDC
1788550471	22 Count	0 Count	0 Count	0 VDC	0 VDC
1788549570	21 Count	0 Count	0 Count	0 VDC	0 VDC
1788548670	20 Count	0 Count	0 Count	0 VDC	0 VDC
1788547769	19 Count	0 Count	0 Count	0 VDC	0 VDC
1788546868	18 Count	0 Count	0 Count	0 VDC	0 VDC
1788545968	17 Count	0 Count	0 Count	0 VDC	0 VDC
1788545067	16 Count	0 Count	0 Count	0 VDC	0 VDC
1788544166	15 Count	0 Count	0 Count	0 VDC	0 VDC
1788543266	14 Count	0 Count	0 Count	0 VDC	0 VDC
1788542365	13 Count	0 Count	0 Count	0 VDC	0 VDC
1788541465	12 Count	0 Count	0 Count	0 VDC	0 VDC
1788540564	11 Count	0 Count	0 Count	0 VDC	0 VDC
1788539663	10 Count	0 Count	0 Count	0 VDC	0 VDC
1788539319	9 Count	0 Count	0 Count	0 VDC	0 VDC
1788539091	8 Count	0 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)