DM2DXG-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DM2DXG-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1772648173	7.73 Volt	170 Pkt	70 Pkt	100 Pcnt
1772646972	7.65 Volt	180 Pkt	70 Pkt	100 Pcnt
1772646371	7.73 Volt	180 Pkt	70 Pkt	100 Pcnt
1772645771	7.8 Volt	170 Pkt	70 Pkt	100 Pcnt
1772644569	7.8 Volt	140 Pkt	60 Pkt	100 Pcnt
1772642167	7.8 Volt	120 Pkt	60 Pkt	100 Pcnt
1772640966	7.73 Volt	150 Pkt	60 Pkt	100 Pcnt
1772639765	7.5 Volt	180 Pkt	70 Pkt	100 Pcnt
1772638564	6.98 Volt	190 Pkt	70 Pkt	100 Pcnt
1772637963	7.73 Volt	170 Pkt	70 Pkt	100 Pcnt
1772633759	7.73 Volt	120 Pkt	50 Pkt	100 Pcnt
1772633159	7.8 Volt	120 Pkt	50 Pkt	100 Pcnt
1772625952	7.5 Volt	180 Pkt	60 Pkt	100 Pcnt
1772624150	7.88 Volt	170 Pkt	70 Pkt	100 Pcnt
1772622348	7.5 Volt	170 Pkt	70 Pkt	100 Pcnt
1772621749	7.35 Volt	190 Pkt	60 Pkt	100 Pcnt
1772619345	7.58 Volt	190 Pkt	60 Pkt	100 Pcnt
1772617544	7.65 Volt	170 Pkt	60 Pkt	99 Pcnt
1772616943	7.73 Volt	170 Pkt	60 Pkt	99 Pcnt
1772616342	7.43 Volt	160 Pkt	60 Pkt	99 Pcnt
1772612739	7.65 Volt	140 Pkt	60 Pkt	100 Pcnt
1772612138	7.73 Volt	130 Pkt	60 Pkt	100 Pcnt
1772611538	7.73 Volt	130 Pkt	60 Pkt	100 Pcnt
1772610937	7.58 Volt	130 Pkt	60 Pkt	100 Pcnt
1772605533	7.65 Volt	120 Pkt	50 Pkt	100 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)