SP9CXD-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP9CXD-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1787571582	87 Count	590 Count	40 Count	4.2 VDC	0.14 VDC
1787570982	84 Count	576 Count	38 Count	4.3 VDC	0.16 VDC
1787570381	83 Count	567 Count	38 Count	4.23 VDC	0.14 VDC
1787569780	81 Count	558 Count	37 Count	4.31 VDC	0.14 VDC
1787568579	78 Count	542 Count	36 Count	4.29 VDC	0.14 VDC
1787567978	76 Count	535 Count	35 Count	4.23 VDC	0.14 VDC
1787567378	74 Count	530 Count	34 Count	4.21 VDC	0.14 VDC
1787566777	73 Count	518 Count	34 Count	4.26 VDC	0.14 VDC
1787566176	65 Count	497 Count	27 Count	4.25 VDC	0.14 VDC
1787565575	64 Count	496 Count	27 Count	4.2 VDC	0.14 VDC
1787564974	58 Count	474 Count	22 Count	4.24 VDC	0.14 VDC
1787564374	53 Count	456 Count	18 Count	4.23 VDC	0.14 VDC
1787563773	50 Count	443 Count	16 Count	4.21 VDC	0.16 VDC
1787563172	48 Count	435 Count	15 Count	4.21 VDC	0.16 VDC
1787562572	46 Count	423 Count	14 Count	4.23 VDC	0.14 VDC
1787561971	45 Count	412 Count	14 Count	4.26 VDC	0.14 VDC
1787561370	39 Count	389 Count	9 Count	4.2 VDC	0.16 VDC
1787560770	34 Count	375 Count	5 Count	4.32 VDC	0.14 VDC
1787560169	33 Count	370 Count	5 Count	4.19 VDC	0.14 VDC
1787559568	32 Count	361 Count	5 Count	4.21 VDC	0.14 VDC
1787558968	31 Count	355 Count	5 Count	4.24 VDC	0.14 VDC
1787558367	30 Count	348 Count	5 Count	4.21 VDC	0.16 VDC
1787557189	24 Count	324 Count	5 Count	4.27 VDC	0.16 VDC
1787556588	23 Count	300 Count	5 Count	4.31 VDC	0.14 VDC
1787555987	22 Count	280 Count	5 Count	4.33 VDC	0.16 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)