Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object LU1QGM. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>
Time RxTraffic* TxTraffic* RxDrop* RSSI* Voltage*
1788664077 0 Pkt 126 Pkt 0 Pkt -41 dBm 12.06 V
1788663147 0 Pkt 121 Pkt 0 Pkt -38 dBm 11.96 V
1788662217 0 Pkt 102 Pkt 0 Pkt -43 dBm 12.06 V
1788661289 0 Pkt 7 Pkt 0 Pkt -39 dBm 11.98 V
1788661129 0 Pkt 114 Pkt 0 Pkt -43 dBm 12.02 V
1788660199 0 Pkt 132 Pkt 0 Pkt -40 dBm 12 V
1788659269 0 Pkt 105 Pkt 0 Pkt -43 dBm 11.96 V
1788658341 0 Pkt 116 Pkt 0 Pkt -44 dBm 11.98 V
1788657414 0 Pkt 144 Pkt 0 Pkt -41 dBm 11.98 V
1788656484 0 Pkt 122 Pkt 0 Pkt -37 dBm 11.96 V
1788655555 0 Pkt 104 Pkt 0 Pkt -40 dBm 12.08 V
1788654627 0 Pkt 119 Pkt 0 Pkt -38 dBm 12.06 V
1788653698 0 Pkt 10 Pkt 0 Pkt -40 dBm 11.98 V
1788645990 0 Pkt 6 Pkt 0 Pkt -47 dBm 11.98 V
1788645054 0 Pkt 154 Pkt 0 Pkt -38 dBm 12 V
1788644123 0 Pkt 142 Pkt 0 Pkt -40 dBm 12.06 V
1788643191 0 Pkt 160 Pkt 0 Pkt -42 dBm 11.98 V
1788642258 0 Pkt 154 Pkt 0 Pkt -40 dBm 12.06 V
1788641329 0 Pkt 137 Pkt 0 Pkt -40 dBm 12.02 V
1788640398 0 Pkt 150 Pkt 0 Pkt -39 dBm 12.02 V
1788639467 0 Pkt 12 Pkt 0 Pkt -38 dBm 12.02 V
1788638724 0 Pkt 181 Pkt 0 Pkt -40 dBm 12.06 V
1788637791 0 Pkt 176 Pkt 0 Pkt -39 dBm 11.98 V
1788636859 0 Pkt 158 Pkt 0 Pkt -39 dBm 11.98 V
1788635928 0 Pkt 134 Pkt 0 Pkt -39 dBm 12 V
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)