VU3HGG-WX Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VU3HGG-WX. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RSSI*	FreeHeap*	Uptime*	OKSend*
1787882217	-38 dBm	32 KB	400 min	41 cnt
1787881615	-45 dBm	32 KB	390 min	40 cnt
1787881014	-37 dBm	32 KB	380 min	39 cnt
1787880414	-40 dBm	32 KB	370 min	38 cnt
1787879815	-45 dBm	32 KB	360 min	37 cnt
1787879214	-37 dBm	32 KB	350 min	36 cnt
1787878614	-39 dBm	32 KB	340 min	35 cnt
1787878014	-37 dBm	32 KB	330 min	34 cnt
1787877414	-38 dBm	32 KB	320 min	33 cnt
1787876814	-38 dBm	32 KB	310 min	32 cnt
1787876214	-41 dBm	32 KB	300 min	31 cnt
1787875614	-37 dBm	32 KB	290 min	30 cnt
1787875014	-38 dBm	32 KB	280 min	29 cnt
1787874414	-41 dBm	32 KB	270 min	28 cnt
1787873814	-37 dBm	32 KB	260 min	27 cnt
1787873214	-37 dBm	32 KB	250 min	26 cnt
1787872614	-37 dBm	32 KB	240 min	25 cnt
1787872014	-43 dBm	32 KB	230 min	24 cnt
1787871421	-40 dBm	32 KB	220 min	23 cnt
1787870815	-37 dBm	32 KB	210 min	22 cnt
1787870214	-41 dBm	33 KB	200 min	21 cnt
1787869614	-39 dBm	32 KB	190 min	20 cnt
1787869014	-38 dBm	33 KB	180 min	19 cnt
1787868414	-40 dBm	33 KB	170 min	18 cnt
1787867814	-38 dBm	33 KB	160 min	17 cnt

*Used Equation Coefficients:

RSSI: 0, 1, 0

FreeHeap: 0, 1, 0

Uptime: 0, 1, 0

OKSend: 0, 1, 0

FailSend: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)