VU3DUE-WX Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VU3DUE-WX. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RSSI*	FreeHeap*	Uptime*	OKSend*	FailSend*
1787958153	-43 dBm	32 KB	338 min	34 cnt	1 cnt
1787957553	-40 dBm	32 KB	328 min	33 cnt	1 cnt
1787956953	-39 dBm	32 KB	318 min	32 cnt	1 cnt
1787956353	-39 dBm	32 KB	308 min	31 cnt	1 cnt
1787955753	-43 dBm	32 KB	298 min	30 cnt	1 cnt
1787955153	-41 dBm	32 KB	288 min	29 cnt	1 cnt
1787954553	-40 dBm	32 KB	278 min	28 cnt	1 cnt
1787953953	-42 dBm	32 KB	268 min	27 cnt	1 cnt
1787953353	-45 dBm	32 KB	258 min	26 cnt	1 cnt
1787952753	-40 dBm	32 KB	248 min	25 cnt	1 cnt
1787952153	-41 dBm	32 KB	238 min	24 cnt	1 cnt
1787951553	-42 dBm	32 KB	228 min	23 cnt	1 cnt
1787950953	-41 dBm	32 KB	218 min	22 cnt	1 cnt
1787950353	-40 dBm	32 KB	208 min	21 cnt	1 cnt
1787949753	-45 dBm	32 KB	198 min	20 cnt	1 cnt
1787949153	-45 dBm	31 KB	188 min	19 cnt	1 cnt
1787948553	-44 dBm	31 KB	178 min	18 cnt	1 cnt
1787947952	-46 dBm	31 KB	168 min	17 cnt	1 cnt
1787947353	-44 dBm	30 KB	158 min	16 cnt	1 cnt
1787946752	-43 dBm	31 KB	148 min	15 cnt	1 cnt
1787946153	-41 dBm	30 KB	138 min	14 cnt	1 cnt
1787945552	-52 dBm	32 KB	128 min	13 cnt	1 cnt
1787944952	-50 dBm	32 KB	118 min	12 cnt	1 cnt
1787944352	-53 dBm	31 KB	108 min	11 cnt	1 cnt
1787943752	-48 dBm	31 KB	98 min	10 cnt	1 cnt

*Used Equation Coefficients:

RSSI: 0, 1, 0

FreeHeap: 0, 1, 0

Uptime: 0, 1, 0

OKSend: 0, 1, 0

FailSend: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)