LU1QGM-0 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU1QGM-0. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1788557560	9 Pkt	108 Pkt	5 Pkt	-44 dBm	11.96 V
1788556628	7 Pkt	131 Pkt	6 Pkt	-36 dBm	11.98 V
1788555692	23 Pkt	131 Pkt	5 Pkt	-41 dBm	12.02 V
1788554754	7 Pkt	138 Pkt	8 Pkt	-41 dBm	11.94 V
1788553817	8 Pkt	138 Pkt	5 Pkt	-40 dBm	11.98 V
1788552882	14 Pkt	151 Pkt	12 Pkt	-43 dBm	12 V
1788551942	5 Pkt	159 Pkt	10 Pkt	-42 dBm	12 V
1788551002	10 Pkt	143 Pkt	9 Pkt	-41 dBm	11.98 V
1788550065	9 Pkt	161 Pkt	18 Pkt	-36 dBm	11.98 V
1788549125	9 Pkt	149 Pkt	15 Pkt	-41 dBm	12 V
1788548187	16 Pkt	190 Pkt	14 Pkt	-40 dBm	12 V
1788547242	15 Pkt	139 Pkt	12 Pkt	-41 dBm	11.94 V
1788546301	9 Pkt	136 Pkt	10 Pkt	-44 dBm	11.96 V
1788545363	13 Pkt	152 Pkt	1 Pkt	-46 dBm	12.02 V
1788544425	10 Pkt	164 Pkt	8 Pkt	-45 dBm	12.02 V
1788543488	9 Pkt	151 Pkt	4 Pkt	-50 dBm	12.02 V
1788542551	10 Pkt	157 Pkt	7 Pkt	-37 dBm	12.06 V
1788541613	54 Pkt	178 Pkt	18 Pkt	-46 dBm	11.94 V
1788540660	22 Pkt	151 Pkt	4 Pkt	-39 dBm	11.98 V
1788539718	20 Pkt	133 Pkt	14 Pkt	-38 dBm	11.98 V
1788536348	0 Pkt	13 Pkt	0 Pkt	-43 dBm	11.98 V
1788535363	6 Pkt	131 Pkt	6 Pkt	-47 dBm	12.02 V
1788534430	8 Pkt	139 Pkt	8 Pkt	-46 dBm	12.02 V
1788533492	6 Pkt	141 Pkt	13 Pkt	-46 dBm	12.02 V
1788532554	9 Pkt	140 Pkt	4 Pkt	-47 dBm	11.96 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)