EL-EA3RCA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-EA3RCA. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1772784377	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	13 TXcount/10m
1772732777	0 RX Erlang	0.41 TX Erlang	0 RXcount/10m	61 TXcount/10m
1772730977	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	24 TXcount/10m
1772729176	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	25 TXcount/10m
1772727376	0 RX Erlang	0.11 TX Erlang	0 RXcount/10m	23 TXcount/10m
1772725576	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	12 TXcount/10m
1772723776	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	9 TXcount/10m
1772721976	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	11 TXcount/10m
1772712976	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	14 TXcount/10m
1772711176	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	20 TXcount/10m
1772709376	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	13 TXcount/10m
1772707577	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	10 TXcount/10m
1772705776	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	5 TXcount/10m
1772703976	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	8 TXcount/10m
1772702196	0 RX Erlang	0.02 TX Erlang	1 RXcount/10m	8 TXcount/10m
1772700376	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	2 TXcount/10m
1772698576	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	5 TXcount/10m
1772696776	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	7 TXcount/10m
1772694976	0 RX Erlang	0.3 TX Erlang	0 RXcount/10m	18 TXcount/10m
1772693176	0 RX Erlang	0.9 TX Erlang	0 RXcount/10m	28 TXcount/10m
1772691376	0 RX Erlang	0.11 TX Erlang	0 RXcount/10m	14 TXcount/10m
1772689576	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	3 TXcount/10m
1772687776	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	6 TXcount/10m
1772685976	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	3 TXcount/10m
1772684176	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	2 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)