HOLLY Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HOLLY. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1761544910	13.88 Volt	320 Pkt	50 Pkt	68 Pcnt
1761544610	13.88 Volt	310 Pkt	60 Pkt	68 Pcnt
1761544309	13.88 Volt	300 Pkt	60 Pkt	68 Pcnt
1761544009	13.28 Volt	300 Pkt	60 Pkt	68 Pcnt
1761543709	13.88 Volt	290 Pkt	50 Pkt	67 Pcnt
1761543408	13.88 Volt	300 Pkt	50 Pkt	67 Pcnt
1761543108	13.88 Volt	280 Pkt	50 Pkt	65 Pcnt
1761542808	13.88 Volt	270 Pkt	50 Pkt	62 Pcnt
1761542507	13.88 Volt	250 Pkt	40 Pkt	59 Pcnt
1761542207	13.8 Volt	240 Pkt	40 Pkt	57 Pcnt
1761541907	13.88 Volt	220 Pkt	40 Pkt	53 Pcnt
1761541607	13.88 Volt	200 Pkt	40 Pkt	49 Pcnt
1761541306	13.88 Volt	190 Pkt	40 Pkt	46 Pcnt
1761541006	13.88 Volt	180 Pkt	30 Pkt	44 Pcnt
1761540706	13.88 Volt	190 Pkt	40 Pkt	44 Pcnt
1761540405	13.88 Volt	180 Pkt	30 Pkt	43 Pcnt
1761540105	13.88 Volt	170 Pkt	30 Pkt	40 Pcnt
1761539805	13.88 Volt	150 Pkt	30 Pkt	40 Pcnt
1761539505	13.88 Volt	150 Pkt	30 Pkt	38 Pcnt
1761539204	13.88 Volt	140 Pkt	30 Pkt	37 Pcnt
1761538904	13.88 Volt	130 Pkt	30 Pkt	36 Pcnt
1761538604	13.88 Volt	120 Pkt	30 Pkt	35 Pcnt
1761538303	13.88 Volt	130 Pkt	30 Pkt	37 Pcnt
1761538003	13.88 Volt	140 Pkt	30 Pkt	38 Pcnt
1761537703	13.88 Volt	140 Pkt	30 Pkt	39 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp1: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)