VU3CAM-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VU3CAM-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RSSI*	FreeHeap*	Uptime*	OKSend*	FailSend*
1788420122	-69 dBm	33 KB	1171 min	116 cnt	3 cnt
1788419523	-69 dBm	33 KB	1161 min	115 cnt	3 cnt
1788418922	-68 dBm	33 KB	1151 min	114 cnt	3 cnt
1788418322	-69 dBm	33 KB	1141 min	113 cnt	3 cnt
1788417722	-68 dBm	33 KB	1131 min	112 cnt	3 cnt
1788417122	-69 dBm	33 KB	1121 min	111 cnt	3 cnt
1788416522	-70 dBm	33 KB	1111 min	110 cnt	3 cnt
1788415922	-69 dBm	33 KB	1101 min	109 cnt	3 cnt
1788415322	-69 dBm	33 KB	1091 min	108 cnt	3 cnt
1788414722	-69 dBm	33 KB	1081 min	107 cnt	3 cnt
1788414122	-66 dBm	33 KB	1071 min	106 cnt	3 cnt
1788413522	-69 dBm	33 KB	1061 min	105 cnt	3 cnt
1788412922	-69 dBm	33 KB	1051 min	104 cnt	3 cnt
1788412322	-69 dBm	33 KB	1041 min	103 cnt	3 cnt
1788411722	-68 dBm	33 KB	1031 min	102 cnt	3 cnt
1788411122	-68 dBm	33 KB	1021 min	101 cnt	3 cnt
1788410522	-64 dBm	33 KB	1011 min	100 cnt	3 cnt
1788409922	-67 dBm	33 KB	1001 min	99 cnt	3 cnt
1788409322	-65 dBm	33 KB	991 min	98 cnt	3 cnt
1788408722	-67 dBm	33 KB	981 min	97 cnt	3 cnt
1788408122	-68 dBm	33 KB	971 min	96 cnt	3 cnt
1788407522	-68 dBm	33 KB	961 min	95 cnt	3 cnt
1788406922	-64 dBm	33 KB	951 min	94 cnt	3 cnt
1788406322	-66 dBm	33 KB	941 min	93 cnt	3 cnt
1788405722	-65 dBm	33 KB	931 min	92 cnt	3 cnt

*Used Equation Coefficients:

RSSI: 0, 1, 0

FreeHeap: 0, 1, 0

Uptime: 0, 1, 0

OKSend: 0, 1, 0

FailSend: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)