KR4ISQ-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KR4ISQ-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	InetIn*	RFiGate*	Temp*
1789923965	38 C	10 Pkts	0 Pkts	38 C
1789923361	38 C	6 Pkts	0 Pkts	38 C
1789922759	39 C	4 Pkts	0 Pkts	38 C
1789922163	38 C	5 Pkts	0 Pkts	37 C
1789921563	37 C	14 Pkts	14 Pkts	37 C
1789920963	38 C	30 Pkts	8 Pkts	38 C
1789920367	37 C	31 Pkts	14 Pkts	38 C
1789919767	37 C	28 Pkts	8 Pkts	37 C
1789919162	37 C	24 Pkts	5 Pkts	38 C
1789918560	38 C	3 Pkts	21 Pkts	38 C
1789917961	37 C	39 Pkts	3 Pkts	37 C
1789917358	38 C	99 Pkts	10 Pkts	37 C
1789916761	38 C	46 Pkts	12 Pkts	37 C
1789916160	37 C	23 Pkts	11 Pkts	37 C
1789915560	37 C	15 Pkts	12 Pkts	37 C
1789914958	38 C	4 Pkts	8 Pkts	37 C
1789914360	37 C	9 Pkts	4 Pkts	37 C
1789913768	37 C	12 Pkts	3 Pkts	37 C
1789913170	37 C	9 Pkts	4 Pkts	37 C
1789912563	37 C	7 Pkts	5 Pkts	37 C
1789911960	37 C	6 Pkts	3 Pkts	37 C
1789911359	37 C	5 Pkts	9 Pkts	37 C
1789910755	37 C	24 Pkts	19 Pkts	38 C
1789910154	38 C	40 Pkts	19 Pkts	37 C
1789909559	37 C	48 Pkts	22 Pkts	39 C

*Used Equation Coefficients:

Temp: 0, 1, 0

InetIn: 0, 1, 0

RFiGate: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)