SP6BRT-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP6BRT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1789949495	0 Count	860 Count	0 Count	0 VDC	0 VDC
1789947708	0 Count	819 Count	0 Count	0 VDC	0 VDC
1789945895	0 Count	772 Count	0 Count	0 VDC	0 VDC
1789944095	0 Count	735 Count	0 Count	0 VDC	0 VDC
1789942295	0 Count	692 Count	0 Count	0 VDC	0 VDC
1789940495	0 Count	654 Count	0 Count	0 VDC	0 VDC
1789938696	0 Count	621 Count	0 Count	0 VDC	0 VDC
1789936896	0 Count	591 Count	0 Count	0 VDC	0 VDC
1789935096	0 Count	553 Count	0 Count	0 VDC	0 VDC
1789933296	0 Count	524 Count	0 Count	0 VDC	0 VDC
1789931496	0 Count	484 Count	0 Count	0 VDC	0 VDC
1789929696	0 Count	443 Count	0 Count	0 VDC	0 VDC
1789927896	0 Count	405 Count	0 Count	0 VDC	0 VDC
1789926096	0 Count	371 Count	0 Count	0 VDC	0 VDC
1789924296	0 Count	334 Count	0 Count	0 VDC	0 VDC
1789922496	0 Count	300 Count	0 Count	0 VDC	0 VDC
1789920695	0 Count	267 Count	0 Count	0 VDC	0 VDC
1789918897	0 Count	230 Count	0 Count	0 VDC	0 VDC
1789917096	0 Count	194 Count	0 Count	0 VDC	0 VDC
1789915296	0 Count	148 Count	0 Count	0 VDC	0 VDC
1789913496	0 Count	59 Count	0 Count	0 VDC	0 VDC
1789911696	0 Count	1024 Count	0 Count	0 VDC	0 VDC
1789909896	0 Count	999 Count	0 Count	0 VDC	0 VDC
1789908096	0 Count	965 Count	0 Count	0 VDC	0 VDC
1789906296	0 Count	937 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)