KW6V-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KW6V-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Shack Temp*	Pi Temp*
1776677416	57 Deg.F	34 Deg.C
1776673842	57 Deg.F	34 Deg.C
1776672033	58 Deg.F	34 Deg.C
1776670262	58 Deg.F	35 Deg.C
1776668434	58 Deg.F	35 Deg.C
1776666658	58 Deg.F	35 Deg.C
1776664838	58 Deg.F	34 Deg.C
1776663043	59 Deg.F	34.5 Deg.C
1776661236	59 Deg.F	35 Deg.C
1776659445	59 Deg.F	35 Deg.C
1776657665	60 Deg.F	36 Deg.C
1776655835	60 Deg.F	35 Deg.C
1776654032	61 Deg.F	35 Deg.C
1776652220	61 Deg.F	37 Deg.C
1776650425	62 Deg.F	36.5 Deg.C
1776648626	62 Deg.F	36.5 Deg.C
1776646835	63 Deg.F	37.4 Deg.C
1776645050	64 Deg.F	38.4 Deg.C
1776643233	64 Deg.F	37.9 Deg.C
1776641472	64 Deg.F	37.9 Deg.C
1776639652	64 Deg.F	37.9 Deg.C
1776637850	64 Deg.F	38.4 Deg.C
1776636041	64 Deg.F	37.4 Deg.C
1776634231	63 Deg.F	37 Deg.C
1776632431	63 Deg.F	37 Deg.C

*Used Equation Coefficients:

Shack Temp: 0, 1, 0

Pi Temp: 0, 0.1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)