TA5LVC-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA5LVC-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	DIGI*	CONN*	VBAT*
1789913462	2 pkt	0 pkt	0 pkt	1 cnt	3.94 V
1789731507	68 pkt	66 pkt	45 pkt	1 cnt	0.5 V
1789730786	58 pkt	56 pkt	38 pkt	1 cnt	0.5 V
1789730066	52 pkt	50 pkt	35 pkt	1 cnt	0.5 V
1789729347	39 pkt	37 pkt	25 pkt	1 cnt	0.51 V
1789728626	25 pkt	23 pkt	14 pkt	1 cnt	0.5 V
1789727906	21 pkt	19 pkt	13 pkt	1 cnt	0.5 V
1789727186	11 pkt	9 pkt	6 pkt	1 cnt	0.5 V
1789726466	2 pkt	0 pkt	0 pkt	1 cnt	0.48 V
1789725741	244 pkt	238 pkt	155 pkt	1 cnt	0.51 V
1789725021	232 pkt	228 pkt	146 pkt	1 cnt	0.51 V
1789724301	225 pkt	221 pkt	142 pkt	1 cnt	0.51 V
1789723581	212 pkt	209 pkt	132 pkt	1 cnt	0.5 V
1789722861	207 pkt	204 pkt	130 pkt	1 cnt	0.49 V
1789722141	191 pkt	188 pkt	117 pkt	1 cnt	0.51 V
1789721420	185 pkt	182 pkt	114 pkt	1 cnt	0.5 V
1789720701	175 pkt	172 pkt	107 pkt	1 cnt	0.5 V
1789719980	169 pkt	166 pkt	104 pkt	1 cnt	0.51 V
1789719261	164 pkt	161 pkt	102 pkt	1 cnt	0.51 V
1789718541	154 pkt	151 pkt	95 pkt	1 cnt	0.51 V
1789717821	143 pkt	140 pkt	87 pkt	1 cnt	0.48 V
1789717101	133 pkt	130 pkt	80 pkt	1 cnt	0.51 V
1789716381	129 pkt	126 pkt	79 pkt	1 cnt	0.52 V
1789715660	121 pkt	118 pkt	74 pkt	1 cnt	0.51 V
1789714942	113 pkt	110 pkt	69 pkt	1 cnt	0.52 V

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

DIGI: 0, 1, 0

CONN: 0, 1, 0

VBAT: 0, 0.01, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)