DK7SB-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DK7SB-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1789932388	954.5 hPa	27.7 C deg	1027.5 hPa	0 C deg
1789930558	953.7 hPa	27.7 C deg	1026.6 hPa	0 C deg
1789928728	953.3 hPa	28.2 C deg	1026.1 hPa	0 C deg
1789927225	952.8 hPa	28.8 C deg	1025.4 hPa	0 C deg
1789925395	952.3 hPa	29.6 C deg	1024.6 hPa	0 C deg
1789923565	952.1 hPa	29.9 C deg	1024.4 hPa	0 C deg
1789921735	952 hPa	30.7 C deg	1024 hPa	0 C deg
1789919905	951.7 hPa	31.1 C deg	1023.6 hPa	0 C deg
1789918074	951.7 hPa	31.7 C deg	1023.5 hPa	0 C deg
1789916244	951.7 hPa	32.2 C deg	1023.4 hPa	0 C deg
1789907094	952.5 hPa	31.5 C deg	1024.5 hPa	0 C deg
1789905264	952.7 hPa	31.1 C deg	1024.7 hPa	0 C deg
1789903434	953.1 hPa	30.1 C deg	1025.4 hPa	0 C deg
1789901604	953.3 hPa	28.8 C deg	1026 hPa	0 C deg
1789899773	953.5 hPa	27.7 C deg	1026.4 hPa	0 C deg
1789897943	953.7 hPa	26.2 C deg	1027 hPa	0 C deg
1789896113	953.7 hPa	25.2 C deg	1027.3 hPa	0 C deg
1789894283	953.7 hPa	24.8 C deg	1027.4 hPa	0 C deg
1789892453	953.7 hPa	23.5 C deg	1027.7 hPa	0 C deg
1789890623	953.7 hPa	22.6 C deg	1028 hPa	0 C deg
1789888793	953.7 hPa	22 C deg	1028.1 hPa	0 C deg
1789886963	953.4 hPa	21.5 C deg	1027.9 hPa	0 C deg
1789885133	953.3 hPa	21 C deg	1028 hPa	0 C deg
1789883303	953.1 hPa	20 C deg	1028 hPa	0 C deg
1789881473	953.1 hPa	19.9 C deg	1028 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)