VK2RGF-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2RGF-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Core*	Battery*	Tx*
1776843053	13.9 VDC	48.3 degC	22.9 degC	62 pkts
1776839453	13.9 VDC	48.3 degC	22.8 degC	29 pkts
1776835853	13.9 VDC	48.3 degC	22.8 degC	42 pkts
1776832253	13.9 VDC	47.8 degC	22.6 degC	41 pkts
1776828653	13.9 VDC	48.3 degC	22.5 degC	29 pkts
1776825053	13.9 VDC	48.3 degC	22.3 degC	32 pkts
1776821453	13.9 VDC	48.3 degC	22.1 degC	33 pkts
1776817855	13.9 VDC	48.3 degC	21.9 degC	33 pkts
1776814255	13.9 VDC	47.2 degC	21.6 degC	35 pkts
1776810656	13.9 VDC	45.1 degC	0 degC	43 pkts
1776807052	13.9 VDC	45.1 degC	21.8 degC	39 pkts
1776803453	13.9 VDC	45.1 degC	21.9 degC	39 pkts
1776799853	13.9 VDC	45.6 degC	22.1 degC	38 pkts
1776796256	13.9 VDC	45.1 degC	20.6 degC	42 pkts
1776792652	13.9 VDC	45.1 degC	0 degC	35 pkts
1776789055	13.9 VDC	46.2 degC	0 degC	33 pkts
1776785453	13.9 VDC	47.2 degC	23.2 degC	30 pkts
1776781853	13.9 VDC	47.2 degC	23.2 degC	35 pkts
1776778254	13.9 VDC	47.8 degC	23.3 degC	28 pkts
1776774653	13.9 VDC	47.8 degC	23.4 degC	31 pkts
1776771053	13.9 VDC	48.3 degC	23.4 degC	33 pkts
1776767453	13.9 VDC	48.3 degC	23.3 degC	26 pkts
1776763853	13.8 VDC	48.3 degC	23.3 degC	36 pkts
1776760254	13.9 VDC	47.8 degC	23.2 degC	36 pkts
1776756653	13.9 VDC	48.3 degC	23.1 degC	32 pkts

*Used Equation Coefficients:

Battery: 0, 0.1, 0

Core: 0, 0.1, 0

Room: 0, 0.1, 0

Battery: 0, 0.1, 0

Tx: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)