S55YLI-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object S55YLI-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1772648627	12.23 Volt	1390 Pkt	300 Pkt	74 Pcnt
1772648627	12.23 Volt	1390 Pkt	300 Pkt	74 Pcnt
1772648327	12.38 Volt	1410 Pkt	300 Pkt	74 Pcnt
1772648027	12.23 Volt	1400 Pkt	300 Pkt	75 Pcnt
1772648027	12.23 Volt	1400 Pkt	300 Pkt	75 Pcnt
1772647727	12.38 Volt	1410 Pkt	300 Pkt	75 Pcnt
1772647428	12.38 Volt	1390 Pkt	290 Pkt	74 Pcnt
1772647427	12.38 Volt	1390 Pkt	290 Pkt	74 Pcnt
1772647127	12.38 Volt	1360 Pkt	290 Pkt	75 Pcnt
1772646827	12.38 Volt	1360 Pkt	290 Pkt	75 Pcnt
1772646827	12.38 Volt	1360 Pkt	290 Pkt	75 Pcnt
1772646527	12.38 Volt	1330 Pkt	280 Pkt	75 Pcnt
1772646230	12.38 Volt	1330 Pkt	280 Pkt	75 Pcnt
1772646227	12.38 Volt	1330 Pkt	280 Pkt	75 Pcnt
1772645927	12.38 Volt	1340 Pkt	280 Pkt	75 Pcnt
1772645627	12.38 Volt	1360 Pkt	280 Pkt	76 Pcnt
1772645627	12.38 Volt	1360 Pkt	280 Pkt	76 Pcnt
1772645327	12.38 Volt	1330 Pkt	280 Pkt	75 Pcnt
1772645030	12.38 Volt	1320 Pkt	280 Pkt	75 Pcnt
1772645027	12.38 Volt	1320 Pkt	280 Pkt	75 Pcnt
1772644727	12.38 Volt	1300 Pkt	280 Pkt	76 Pcnt
1772644428	12.38 Volt	1310 Pkt	280 Pkt	75 Pcnt
1772644427	12.38 Volt	1310 Pkt	280 Pkt	75 Pcnt
1772644127	12.38 Volt	1330 Pkt	280 Pkt	75 Pcnt
1772643828	12.38 Volt	1340 Pkt	290 Pkt	75 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)