KK4ZDZ-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KK4ZDZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1789941100	184 Pkts	184 Pkts	87 Pkts	53 C
1789937500	149 Pkts	145 Pkts	72 Pkts	53 C
1789933899	141 Pkts	137 Pkts	64 Pkts	53 C
1789930299	166 Pkts	163 Pkts	65 Pkts	54 C
1789926699	148 Pkts	145 Pkts	82 Pkts	53 C
1789923099	257 Pkts	254 Pkts	105 Pkts	52 C
1789919499	213 Pkts	211 Pkts	95 Pkts	53 C
1789915899	242 Pkts	235 Pkts	105 Pkts	52 C
1789912299	258 Pkts	253 Pkts	104 Pkts	52 C
1789908699	280 Pkts	276 Pkts	107 Pkts	52 C
1789905099	327 Pkts	323 Pkts	109 Pkts	52 C
1789901499	274 Pkts	268 Pkts	124 Pkts	52 C
1789897899	291 Pkts	288 Pkts	129 Pkts	52 C
1789894299	270 Pkts	266 Pkts	117 Pkts	52 C
1789890699	353 Pkts	348 Pkts	130 Pkts	52 C
1789887099	326 Pkts	322 Pkts	116 Pkts	51 C
1789883499	287 Pkts	285 Pkts	106 Pkts	52 C
1789879899	284 Pkts	281 Pkts	117 Pkts	52 C
1789876299	287 Pkts	282 Pkts	94 Pkts	52 C
1789872699	402 Pkts	398 Pkts	121 Pkts	52 C
1789869099	269 Pkts	264 Pkts	123 Pkts	52 C
1789865499	255 Pkts	249 Pkts	133 Pkts	52 C
1789861899	250 Pkts	246 Pkts	91 Pkts	52 C
1789858299	231 Pkts	228 Pkts	78 Pkts	53 C
1789854699	208 Pkts	205 Pkts	113 Pkts	54 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)