E20MZU Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E20MZU. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Eff*
1785324861	13.35 Volt	60 Pkt	60 Pkt	96 Pcnt	97 Pcnt
1785324560	12.72 Volt	50 Pkt	50 Pkt	96 Pcnt	97 Pcnt
1785324260	12.32 Volt	40 Pkt	40 Pkt	95 Pcnt	97 Pcnt
1785323960	12.48 Volt	40 Pkt	40 Pkt	95 Pcnt	97 Pcnt
1785323660	12.48 Volt	40 Pkt	40 Pkt	95 Pcnt	97 Pcnt
1785323359	12.25 Volt	40 Pkt	40 Pkt	95 Pcnt	97 Pcnt
1785323059	12.25 Volt	50 Pkt	50 Pkt	96 Pcnt	97 Pcnt
1785322759	12.48 Volt	50 Pkt	50 Pkt	96 Pcnt	97 Pcnt
1785322458	12.56 Volt	50 Pkt	50 Pkt	98 Pcnt	98 Pcnt
1785322158	12.25 Volt	50 Pkt	50 Pkt	98 Pcnt	98 Pcnt
1785321858	12.96 Volt	40 Pkt	40 Pkt	100 Pcnt	100 Pcnt
1785321557	13.43 Volt	30 Pkt	30 Pkt	100 Pcnt	100 Pcnt
1785321257	12.32 Volt	30 Pkt	30 Pkt	100 Pcnt	100 Pcnt
1785320957	12.32 Volt	30 Pkt	30 Pkt	100 Pcnt	100 Pcnt
1785320656	12.4 Volt	30 Pkt	30 Pkt	100 Pcnt	100 Pcnt
1785320356	12.4 Volt	20 Pkt	20 Pkt	100 Pcnt	100 Pcnt
1785320056	12.4 Volt	20 Pkt	20 Pkt	100 Pcnt	100 Pcnt
1785319756	12.25 Volt	20 Pkt	20 Pkt	100 Pcnt	100 Pcnt
1785319455	13.59 Volt	10 Pkt	10 Pkt	100 Pcnt	100 Pcnt
1785319155	12.4 Volt	10 Pkt	10 Pkt	100 Pcnt	100 Pcnt
1785318855	13.35 Volt	0 Pkt	0 Pkt	100 Pcnt	100 Pcnt
1785318555	12.8 Volt	0 Pkt	0 Pkt	100 Pcnt	100 Pcnt
1785318254	12.25 Volt	0 Pkt	0 Pkt	100 Pcnt	100 Pcnt
1785317954	12.56 Volt	0 Pkt	0 Pkt	100 Pcnt	100 Pcnt
1785317654	12.48 Volt	0 Pkt	0 Pkt	100 Pcnt	100 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)