This is the latest recevied telemetry packets stored in our database for station/object DL4QB-7. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Press*
Temp.in*
Hum*
QNH*
Temp.out*
1765565606
1015 hPa
22.4 C deg
44.1 %
1021.4 hPa
0 C deg
1765563803
1014.7 hPa
22.3 C deg
44.6 %
1021.2 hPa
0 C deg
1765561975
1014.4 hPa
21.7 C deg
44.1 %
1020.8 hPa
0 C deg
1765560160
1014.2 hPa
20.7 C deg
48.4 %
1020.7 hPa
0 C deg
1765558483
1014.1 hPa
19.8 C deg
51.7 %
1020.6 hPa
0 C deg
1765553437
1011 hPa
18.2 C deg
53 %
1017.6 hPa
0 C deg
1765552731
1010.9 hPa
17.9 C deg
55.4 %
1017.4 hPa
0 C deg
1765552722
1010.9 hPa
17.9 C deg
55.4 %
1017.4 hPa
0 C deg
1765550396
1010.7 hPa
17.6 C deg
54 %
1017.2 hPa
0 C deg
1765550384
1010.7 hPa
17.6 C deg
54 %
1017.2 hPa
0 C deg
1765456795
1012 hPa
17.7 C deg
60.5 %
1018.5 hPa
0 C deg
1765454981
1012.4 hPa
17.4 C deg
61.4 %
1018.9 hPa
0 C deg
1765454980
1012.4 hPa
17.4 C deg
61.4 %
1018.9 hPa
0 C deg
1765446678
1013.5 hPa
19.2 C deg
58.2 %
1020 hPa
0 C deg
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)