SR9NSK-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR9NSK-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10min*	Tx10min*	Digi10min*	Tempre*
1780532139	100 Pkt	7 Pkt	4 Pkt	33 DegC
1780531537	95 Pkt	9 Pkt	7 Pkt	33 DegC
1780530936	88 Pkt	7 Pkt	3 Pkt	33 DegC
1780530332	84 Pkt	7 Pkt	5 Pkt	33 DegC
1780529732	101 Pkt	8 Pkt	5 Pkt	33 DegC
1780529130	86 Pkt	7 Pkt	5 Pkt	33 DegC
1780528530	111 Pkt	8 Pkt	4 Pkt	33.5 DegC
1780527928	97 Pkt	7 Pkt	5 Pkt	33.5 DegC
1780527328	105 Pkt	7 Pkt	4 Pkt	33.5 DegC
1780526727	89 Pkt	8 Pkt	5 Pkt	33.5 DegC
1780526124	98 Pkt	7 Pkt	4 Pkt	33.5 DegC
1780525522	103 Pkt	4 Pkt	2 Pkt	33.5 DegC
1780524922	107 Pkt	7 Pkt	4 Pkt	33.5 DegC
1780524313	101 Pkt	7 Pkt	3 Pkt	33.5 DegC
1780523708	101 Pkt	7 Pkt	5 Pkt	33.5 DegC
1780523108	76 Pkt	6 Pkt	3 Pkt	33.5 DegC
1780522506	101 Pkt	9 Pkt	6 Pkt	33.5 DegC
1780521906	97 Pkt	7 Pkt	4 Pkt	34 DegC
1780521304	106 Pkt	5 Pkt	3 Pkt	34 DegC
1780520704	92 Pkt	12 Pkt	8 Pkt	34 DegC
1780520100	86 Pkt	7 Pkt	5 Pkt	34 DegC
1780519501	119 Pkt	10 Pkt	7 Pkt	34 DegC
1780518898	110 Pkt	9 Pkt	7 Pkt	34 DegC
1780518299	137 Pkt	17 Pkt	13 Pkt	34 DegC
1780517697	100 Pkt	7 Pkt	5 Pkt	34 DegC

*Used Equation Coefficients:

Rx10min: 0, 1, 0

Tx10min: 0, 1, 0

Digi10min: 0, 1, 0

HostTx10m: 0, 1, 0

Tempre: 0, 0.5, -50

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)