HS5FXK-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS5FXK-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*	Voltage*
1772740241	64 ug/m3	95 ug/m3	102 ug/m3	-84 dBm	5.19 V
1772739227	65 ug/m3	95 ug/m3	100 ug/m3	-84 dBm	5.19 V
1772738212	67 ug/m3	100 ug/m3	107 ug/m3	-85 dBm	5.19 V
1772737197	66 ug/m3	93 ug/m3	100 ug/m3	-84 dBm	5.17 V
1772736181	59 ug/m3	87 ug/m3	91 ug/m3	-84 dBm	5.19 V
1772735166	60 ug/m3	85 ug/m3	89 ug/m3	-83 dBm	5.19 V
1772734151	61 ug/m3	89 ug/m3	96 ug/m3	-84 dBm	5.19 V
1772733136	58 ug/m3	80 ug/m3	91 ug/m3	-84 dBm	5.19 V
1772732122	59 ug/m3	88 ug/m3	91 ug/m3	-83 dBm	5.19 V
1772731107	56 ug/m3	76 ug/m3	89 ug/m3	-84 dBm	5.19 V
1772730091	51 ug/m3	66 ug/m3	76 ug/m3	-83 dBm	5.21 V
1772729431	51 ug/m3	73 ug/m3	80 ug/m3	-84 dBm	5.19 V
1772728416	52 ug/m3	75 ug/m3	76 ug/m3	-84 dBm	5.19 V
1772727400	56 ug/m3	80 ug/m3	85 ug/m3	-84 dBm	5.17 V
1772726385	60 ug/m3	86 ug/m3	90 ug/m3	-82 dBm	5.19 V
1772725370	50 ug/m3	83 ug/m3	87 ug/m3	-83 dBm	5.19 V
1772724355	50 ug/m3	70 ug/m3	73 ug/m3	-83 dBm	5.19 V
1772723340	50 ug/m3	72 ug/m3	75 ug/m3	-83 dBm	5.19 V
1772722325	54 ug/m3	72 ug/m3	76 ug/m3	-83 dBm	5.19 V
1772721707	45 ug/m3	63 ug/m3	65 ug/m3	-84 dBm	5.19 V
1772720692	42 ug/m3	61 ug/m3	64 ug/m3	-83 dBm	5.19 V
1772719676	40 ug/m3	58 ug/m3	59 ug/m3	-84 dBm	5.19 V
1772718660	42 ug/m3	61 ug/m3	66 ug/m3	-83 dBm	5.19 V
1772717645	58 ug/m3	84 ug/m3	87 ug/m3	-84 dBm	5.19 V
1772716630	59 ug/m3	83 ug/m3	87 ug/m3	-84 dBm	5.21 V

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)