TA2EE-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA2EE-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*
1757592248	6 Pkt	19 Pkt	-56 dBm
1757591335	2 Pkt	8 Pkt	-54 dBm
1757590403	16 Pkt	12 Pkt	-51 dBm
1757589483	15 Pkt	9 Pkt	-53 dBm
1757588561	20 Pkt	10 Pkt	-56 dBm
1757587642	7 Pkt	5 Pkt	-58 dBm
1757586714	12 Pkt	11 Pkt	-56 dBm
1757585792	10 Pkt	5 Pkt	-54 dBm
1757584867	14 Pkt	8 Pkt	-56 dBm
1757583945	25 Pkt	13 Pkt	-56 dBm
1757583022	21 Pkt	4 Pkt	-56 dBm
1757582100	21 Pkt	1 Pkt	-57 dBm
1757581178	17 Pkt	8 Pkt	-56 dBm
1757580256	3 Pkt	2 Pkt	-55 dBm
1757579334	13 Pkt	4 Pkt	-56 dBm
1757578411	1 Pkt	0 Pkt	-57 dBm
1757577818	20 Pkt	8 Pkt	-57 dBm
1757576896	18 Pkt	1 Pkt	-59 dBm
1757575973	12 Pkt	4 Pkt	-58 dBm
1757575051	14 Pkt	5 Pkt	-60 dBm
1757574129	15 Pkt	3 Pkt	-57 dBm
1757573207	18 Pkt	4 Pkt	-56 dBm
1757572285	17 Pkt	7 Pkt	-59 dBm
1757571362	24 Pkt	8 Pkt	-53 dBm
1757570440	15 Pkt	8 Pkt	-55 dBm

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

SUN: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)