SQ8MAE-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ8MAE-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1772889240	71 Count	361 Count	69 Count	3.94 VDC	0.08 VDC
1772888038	48 Count	240 Count	47 Count	3.94 VDC	0.08 VDC
1772886837	25 Count	116 Count	25 Count	3.94 VDC	0.08 VDC
1772885635	227 Count	1103 Count	215 Count	3.94 VDC	0.08 VDC
1772884434	206 Count	994 Count	195 Count	3.94 VDC	0.08 VDC
1772883232	185 Count	845 Count	175 Count	3.94 VDC	0.08 VDC
1772882031	159 Count	706 Count	150 Count	3.93 VDC	0.08 VDC
1772880830	124 Count	573 Count	116 Count	3.93 VDC	0.08 VDC
1772879628	82 Count	420 Count	75 Count	3.94 VDC	0.08 VDC
1772878427	68 Count	328 Count	62 Count	3.93 VDC	0.08 VDC
1772877225	46 Count	208 Count	41 Count	3.92 VDC	0.08 VDC
1772876050	28 Count	125 Count	28 Count	3.93 VDC	0.08 VDC
1772874848	226 Count	1039 Count	220 Count	3.93 VDC	0.08 VDC
1772873647	203 Count	902 Count	198 Count	3.94 VDC	0.08 VDC
1772872445	171 Count	737 Count	167 Count	3.92 VDC	0.08 VDC
1772871244	138 Count	597 Count	135 Count	3.92 VDC	0.08 VDC
1772870042	99 Count	425 Count	97 Count	3.91 VDC	0.08 VDC
1772868862	62 Count	280 Count	61 Count	3.9 VDC	0.08 VDC
1772867640	26 Count	140 Count	26 Count	3.9 VDC	0.08 VDC
1772866438	226 Count	1079 Count	220 Count	3.89 VDC	0.08 VDC
1772865237	182 Count	915 Count	177 Count	3.87 VDC	0.08 VDC
1772864035	148 Count	755 Count	144 Count	3.85 VDC	0.08 VDC
1772862834	112 Count	605 Count	109 Count	3.81 VDC	0.08 VDC
1772861658	85 Count	467 Count	83 Count	3.79 VDC	0.08 VDC
1772860431	60 Count	309 Count	59 Count	3.77 VDC	0.08 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)