HB9AK-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HB9AK-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1776677140	952.3 hPa	21.2 C deg	45.9 %	1016.3 hPa	0 C deg
1776675324	952.2 hPa	21.7 C deg	44.5 %	1016.1 hPa	0 C deg
1776673514	952.6 hPa	17.7 C deg	48.5 %	1017.4 hPa	0 C deg
1776671700	952.6 hPa	16.3 C deg	48.3 %	1017.7 hPa	0 C deg
1776668064	952.9 hPa	11 C deg	51.8 %	1019.3 hPa	0 C deg
1776664435	953 hPa	9.2 C deg	51.9 %	1019.9 hPa	0 C deg
1776662619	953.2 hPa	5.5 C deg	55.1 %	1021 hPa	0 C deg
1776660804	953.1 hPa	4.1 C deg	56.2 %	1021.3 hPa	0 C deg
1776660804	953.1 hPa	4.1 C deg	56.2 %	1021.3 hPa	0 C deg
1776658989	953.1 hPa	3.6 C deg	56.6 %	1021.3 hPa	0 C deg
1776658989	953.1 hPa	3.6 C deg	56.6 %	1021.3 hPa	0 C deg
1776657174	953 hPa	3.8 C deg	56.3 %	1021.2 hPa	0 C deg
1776657174	953 hPa	3.8 C deg	56.3 %	1021.2 hPa	0 C deg
1776655359	953.1 hPa	4.6 C deg	55.1 %	1021.2 hPa	0 C deg
1776655359	953.1 hPa	4.6 C deg	55.1 %	1021.2 hPa	0 C deg
1776653544	953.3 hPa	4.3 C deg	55.5 %	1021.5 hPa	0 C deg
1776653544	953.3 hPa	4.3 C deg	55.5 %	1021.5 hPa	0 C deg
1776651732	953.5 hPa	4.3 C deg	55.4 %	1021.6 hPa	0 C deg
1776651729	953.5 hPa	4.3 C deg	55.4 %	1021.6 hPa	0 C deg
1776649914	953.6 hPa	4.8 C deg	54.7 %	1021.6 hPa	0 C deg
1776649914	953.6 hPa	4.8 C deg	54.7 %	1021.6 hPa	0 C deg
1776648099	953.8 hPa	5 C deg	54.2 %	1021.7 hPa	0 C deg
1776648098	953.8 hPa	5 C deg	54.2 %	1021.7 hPa	0 C deg
1776646283	953.9 hPa	5.3 C deg	53.8 %	1021.8 hPa	0 C deg
1776646283	953.9 hPa	5.3 C deg	53.8 %	1021.8 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)