VK3RMG-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK3RMG-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Battery*	TX*	Value4*	Value5*
1787576835	15 Deg.C	13 Volts	31 PTT's	12	31
1787575035	15.5 Deg.C	13.1 Volts	21 PTT's	12	1
1787573235	15.5 Deg.C	13.1 Volts	25 PTT's	11	31
1787571435	15.5 Deg.C	13.1 Volts	23 PTT's	11	1
1787569635	15.5 Deg.C	13.1 Volts	28 PTT's	10	31
1787567835	15.5 Deg.C	13.1 Volts	26 PTT's	10	1
1787566036	15.5 Deg.C	13.1 Volts	29 PTT's	9	31
1787564235	15.5 Deg.C	13.1 Volts	28 PTT's	9	1
1787562436	16 Deg.C	13.1 Volts	26 PTT's	8	31
1787560637	16 Deg.C	13.1 Volts	26 PTT's	8	1
1787558842	16.5 Deg.C	13.1 Volts	25 PTT's	7	31
1787555236	17.5 Deg.C	13.1 Volts	30 PTT's	6	31
1787553436	18 Deg.C	13.1 Volts	23 PTT's	6	1
1787551638	18 Deg.C	13.1 Volts	23 PTT's	5	31
1787549836	18.5 Deg.C	13.1 Volts	18 PTT's	5	1
1787548036	18.5 Deg.C	13.1 Volts	27 PTT's	4	31
1787546236	18.5 Deg.C	13.1 Volts	22 PTT's	4	1
1787544437	18 Deg.C	13.1 Volts	25 PTT's	3	31
1787542636	18 Deg.C	13.1 Volts	26 PTT's	3	1
1787540837	18 Deg.C	13.1 Volts	29 PTT's	2	31
1787539037	17.5 Deg.C	13.1 Volts	23 PTT's	2	1
1787537237	17 Deg.C	13.1 Volts	27 PTT's	1	31
1787535436	16.5 Deg.C	13.1 Volts	24 PTT's	1	1
1787533637	16 Deg.C	13 Volts	32 PTT's	0	31
1787531872	15 Deg.C	13.1 Volts	32 PTT's	0	1

*Used Equation Coefficients:

Temp: 0, 0.5, 0

Battery: 0, 0.1, 0

TX: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)