EL-F1DUE Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-F1DUE. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1761931823	0 RX Erlang	0.83 TX Erlang	0 RXcount/10m	29 TXcount/10m
1761931223	0 RX Erlang	0.94 TX Erlang	0 RXcount/10m	9 TXcount/10m
1761930623	0 RX Erlang	0.93 TX Erlang	0 RXcount/10m	10 TXcount/10m
1761930023	0 RX Erlang	0.96 TX Erlang	0 RXcount/10m	8 TXcount/10m
1761928823	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	4 TXcount/10m
1761928230	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	6 TXcount/10m
1761927023	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	2 TXcount/10m
1761926242	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	7 TXcount/10m
1761925642	0 RX Erlang	0.32 TX Erlang	0 RXcount/10m	11 TXcount/10m
1761925039	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1761924439	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	4 TXcount/10m
1761923839	0 RX Erlang	0.83 TX Erlang	0 RXcount/10m	14 TXcount/10m
1761923246	0 RX Erlang	0.56 TX Erlang	0 RXcount/10m	13 TXcount/10m
1761922639	0 RX Erlang	0.74 TX Erlang	0 RXcount/10m	8 TXcount/10m
1761922039	0 RX Erlang	0.91 TX Erlang	0 RXcount/10m	9 TXcount/10m
1761921439	0 RX Erlang	0.91 TX Erlang	0 RXcount/10m	9 TXcount/10m
1761920839	0 RX Erlang	0.67 TX Erlang	0 RXcount/10m	10 TXcount/10m
1761920239	0 RX Erlang	0.9 TX Erlang	0 RXcount/10m	12 TXcount/10m
1761919639	0 RX Erlang	0.06 TX Erlang	0 RXcount/10m	4 TXcount/10m
1761918275	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	5 TXcount/10m
1761917424	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1761916824	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	3 TXcount/10m
1761916224	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	9 TXcount/10m
1761908573	0 RX Erlang	0.75 TX Erlang	0 RXcount/10m	14 TXcount/10m
1761906773	0 RX Erlang	0.85 TX Erlang	0 RXcount/10m	14 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)