IS0ANU-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IS0ANU-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff*
1776682812	3 Pkt	10 Pkt	2 Pkt	1.88 Pcnt	66 Pcnt
1776682512	3 Pkt	10 Pkt	2 Pkt	1.88 Pcnt	66 Pcnt
1776682212	2 Pkt	10 Pkt	2 Pkt	1.88 Pcnt	66 Pcnt
1776681912	3 Pkt	10 Pkt	2 Pkt	1.88 Pcnt	66 Pcnt
1776681612	5 Pkt	10 Pkt	2 Pkt	1.88 Pcnt	66 Pcnt
1776681312	5 Pkt	10 Pkt	2 Pkt	1.88 Pcnt	66 Pcnt
1776681012	2 Pkt	10 Pkt	2 Pkt	1.88 Pcnt	66 Pcnt
1776680712	2 Pkt	10 Pkt	2 Pkt	1.88 Pcnt	66 Pcnt
1776680412	3 Pkt	10 Pkt	2 Pkt	1.88 Pcnt	66 Pcnt
1776680112	3 Pkt	10 Pkt	2 Pkt	1.88 Pcnt	66 Pcnt
1776679812	3 Pkt	10 Pkt	2 Pkt	1.88 Pcnt	66 Pcnt
1776679512	3 Pkt	10 Pkt	2 Pkt	1.88 Pcnt	66 Pcnt
1776679212	3 Pkt	10 Pkt	2 Pkt	1.88 Pcnt	66 Pcnt
1776678912	3 Pkt	10 Pkt	2 Pkt	1.88 Pcnt	66 Pcnt
1776678612	2 Pkt	10 Pkt	2 Pkt	1.88 Pcnt	66 Pcnt
1776678312	2 Pkt	10 Pkt	2 Pkt	1.88 Pcnt	66 Pcnt
1776678012	4 Pkt	10 Pkt	2 Pkt	1.88 Pcnt	66 Pcnt
1776677712	4 Pkt	10 Pkt	2 Pkt	1.88 Pcnt	66 Pcnt
1776677412	2 Pkt	10 Pkt	2 Pkt	1.88 Pcnt	66 Pcnt
1776677112	2 Pkt	10 Pkt	2 Pkt	1.88 Pcnt	66 Pcnt
1776676812	2 Pkt	10 Pkt	2 Pkt	1.88 Pcnt	66 Pcnt
1776676512	2 Pkt	30 Pkt	2 Pkt	1.88 Pcnt	66 Pcnt
1776676212	3 Pkt	40 Pkt	2 Pkt	1.88 Pcnt	66 Pcnt
1776675912	4 Pkt	60 Pkt	2 Pkt	1.88 Pcnt	66 Pcnt
1776675612	3 Pkt	70 Pkt	2 Pkt	1.88 Pcnt	66 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)