VK5RAC-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK5RAC-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Battery*	TX*	Value4*	Value5*
1761648125	18.5 Deg.C	13.6 Volts	43 PTT's	10	37
1761646325	20 Deg.C	13.6 Volts	47 PTT's	10	7
1761644524	21.5 Deg.C	13.6 Volts	37 PTT's	9	37
1761642729	22 Deg.C	13.6 Volts	37 PTT's	9	7
1761640930	22 Deg.C	13.6 Volts	31 PTT's	8	37
1761639129	21.5 Deg.C	13.6 Volts	30 PTT's	8	7
1761637324	21 Deg.C	13.6 Volts	48 PTT's	7	37
1761635525	20.5 Deg.C	13.6 Volts	41 PTT's	7	7
1761633726	20.5 Deg.C	13.6 Volts	36 PTT's	6	37
1761631925	21 Deg.C	13.6 Volts	36 PTT's	6	7
1761630127	21 Deg.C	13.6 Volts	34 PTT's	5	37
1761628324	21 Deg.C	13.6 Volts	34 PTT's	5	7
1761626524	21 Deg.C	13.6 Volts	54 PTT's	4	37
1761624724	20.5 Deg.C	13.6 Volts	58 PTT's	4	7
1761622925	20 Deg.C	13.6 Volts	40 PTT's	3	37
1761621124	19.5 Deg.C	13.6 Volts	35 PTT's	3	7
1761619325	18.5 Deg.C	13.6 Volts	36 PTT's	2	37
1761617525	18 Deg.C	13.6 Volts	32 PTT's	2	7
1761615725	18 Deg.C	13.6 Volts	31 PTT's	1	37
1761612126	17.5 Deg.C	13.6 Volts	34 PTT's	0	37
1761610330	18 Deg.C	13.6 Volts	41 PTT's	0	7
1761603124	17 Deg.C	13.6 Volts	38 PTT's	22	7
1761601324	16.5 Deg.C	13.6 Volts	41 PTT's	21	37
1761599525	16.5 Deg.C	13.6 Volts	39 PTT's	21	7
1761597726	16.5 Deg.C	13.6 Volts	37 PTT's	20	37

*Used Equation Coefficients:

Temp: 0, 0.5, 0

Battery: 0, 0.1, 0

TX: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)