VK2RGA-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2RGA-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Core*	Tx*
1784719080	12.5 VDC	42.3 degC	29 pkts
1784715480	12.6 VDC	43.3 degC	29 pkts
1784711880	12.6 VDC	42.8 degC	27 pkts
1784708281	12.6 VDC	43.3 degC	27 pkts
1784704680	12.5 VDC	44.3 degC	57 pkts
1784701079	12.7 VDC	43.8 degC	51 pkts
1784697480	13.7 VDC	44.8 degC	29 pkts
1784693879	13.7 VDC	43.8 degC	28 pkts
1784690280	13.7 VDC	43.3 degC	38 pkts
1784686679	14.4 VDC	42.8 degC	48 pkts
1784683080	13.5 VDC	41.8 degC	45 pkts
1784679480	13.6 VDC	42.3 degC	37 pkts
1784675880	12.9 VDC	40.9 degC	38 pkts
1784672281	12.6 VDC	40.4 degC	24 pkts
1784668681	12.4 VDC	40.4 degC	25 pkts
1784665080	12.4 VDC	39.9 degC	24 pkts
1784661481	12.4 VDC	40.4 degC	25 pkts
1784657880	12.4 VDC	41.8 degC	23 pkts
1784654279	12.5 VDC	40.9 degC	24 pkts
1784650680	12.5 VDC	40.4 degC	24 pkts
1784647081	12.5 VDC	40.9 degC	23 pkts
1784643480	12.5 VDC	40.9 degC	25 pkts
1784639880	12.5 VDC	40.9 degC	24 pkts
1784636281	12.5 VDC	41.8 degC	22 pkts
1784632680	12.6 VDC	42.3 degC	24 pkts

*Used Equation Coefficients:

Battery: 0, 0.1, 0

Core: 0, 0.1, 0

Room: 0, 0.1, 0

Battery: 0, 0.1, 0

Tx: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)