ND7L-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ND7L-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1755838930	130 Pkts	124 Pkts	33 Pkts	26 C
1755835330	104 Pkts	101 Pkts	25 Pkts	25 C
1755824530	88 Pkts	87 Pkts	32 Pkts	27 C
1755820930	95 Pkts	95 Pkts	34 Pkts	27 C
1755817330	102 Pkts	100 Pkts	43 Pkts	27 C
1755813730	95 Pkts	95 Pkts	31 Pkts	27 C
1755810130	140 Pkts	137 Pkts	53 Pkts	26 C
1755806530	111 Pkts	109 Pkts	53 Pkts	26 C
1755802930	81 Pkts	78 Pkts	29 Pkts	25 C
1755792129	149 Pkts	148 Pkts	35 Pkts	24 C
1755788530	158 Pkts	155 Pkts	46 Pkts	24 C
1755784930	194 Pkts	189 Pkts	61 Pkts	24 C
1755781330	154 Pkts	151 Pkts	61 Pkts	25 C
1755777730	128 Pkts	123 Pkts	30 Pkts	24 C
1755770530	120 Pkts	116 Pkts	35 Pkts	25 C
1755759729	67 Pkts	66 Pkts	15 Pkts	25 C
1755756130	65 Pkts	64 Pkts	20 Pkts	25 C
1755752529	116 Pkts	110 Pkts	43 Pkts	25 C
1755745329	87 Pkts	85 Pkts	23 Pkts	26 C
1755741729	89 Pkts	86 Pkts	35 Pkts	27 C
1755727330	97 Pkts	95 Pkts	35 Pkts	27 C
1755723730	106 Pkts	106 Pkts	34 Pkts	27 C
1755712931	96 Pkts	92 Pkts	27 Pkts	25 C
1755705729	102 Pkts	97 Pkts	35 Pkts	24 C
1755694929	96 Pkts	92 Pkts	17 Pkts	24 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)