WC4PEM-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WC4PEM-8. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Vin*	Dg1h*	Eff1h*	Eff1h*
1780566624	29 C	14.03 Volt	260 Pkt	68 Pcnt	68 Pcnt
1780566325	29 C	14.03 Volt	250 Pkt	69 Pcnt	69 Pcnt
1780566324	29 C	14.03 Volt	250 Pkt	69 Pcnt	69 Pcnt
1780566024	29 C	14.03 Volt	260 Pkt	68 Pcnt	68 Pcnt
1780565725	29 C	14.03 Volt	260 Pkt	68 Pcnt	68 Pcnt
1780565724	29 C	14.03 Volt	260 Pkt	68 Pcnt	68 Pcnt
1780565424	29 C	14.03 Volt	260 Pkt	67 Pcnt	67 Pcnt
1780565125	29 C	14.03 Volt	270 Pkt	69 Pcnt	69 Pcnt
1780565124	29 C	14.03 Volt	270 Pkt	69 Pcnt	69 Pcnt
1780564824	29 C	14.03 Volt	270 Pkt	68 Pcnt	68 Pcnt
1780564525	29 C	14.03 Volt	270 Pkt	69 Pcnt	69 Pcnt
1780564524	29 C	14.03 Volt	270 Pkt	69 Pcnt	69 Pcnt
1780564225	29 C	14.03 Volt	270 Pkt	69 Pcnt	69 Pcnt
1780563925	28.5 C	14.03 Volt	270 Pkt	70 Pcnt	70 Pcnt
1780563924	28.5 C	14.03 Volt	270 Pkt	70 Pcnt	70 Pcnt
1780563624	29 C	14.03 Volt	260 Pkt	70 Pcnt	70 Pcnt
1780563325	29 C	14.03 Volt	270 Pkt	70 Pcnt	70 Pcnt
1780563324	29 C	14.03 Volt	270 Pkt	70 Pcnt	70 Pcnt
1780563024	29 C	14.03 Volt	270 Pkt	69 Pcnt	69 Pcnt
1780562725	29 C	14.03 Volt	270 Pkt	69 Pcnt	69 Pcnt
1780562724	29 C	14.03 Volt	270 Pkt	69 Pcnt	69 Pcnt
1780562424	29 C	14.03 Volt	280 Pkt	69 Pcnt	69 Pcnt
1780562125	29 C	14.03 Volt	280 Pkt	69 Pcnt	69 Pcnt
1780562124	29 C	14.03 Volt	280 Pkt	69 Pcnt	69 Pcnt
1780561824	29 C	14.03 Volt	280 Pkt	69 Pcnt	69 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)