9A1ARS-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A1ARS-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp.*	Rx1h*	Dg10m*	DgR*	Eff*
1765760316	24 'C	590 Pkt	26 Pkt	1.4 Pcnt	81 Pcnt
1765759716	24 'C	590 Pkt	24 Pkt	1.4 Pcnt	81 Pcnt
1765759416	24 'C	600 Pkt	33 Pkt	1.4 Pcnt	81 Pcnt
1765759117	24 'C	600 Pkt	32 Pkt	1.39 Pcnt	81 Pcnt
1765759116	24 'C	600 Pkt	32 Pkt	1.39 Pcnt	81 Pcnt
1765758816	24 'C	600 Pkt	24 Pkt	1.39 Pcnt	81 Pcnt
1765758516	24 'C	600 Pkt	31 Pkt	1.39 Pcnt	81 Pcnt
1765758216	24 'C	600 Pkt	39 Pkt	1.39 Pcnt	81 Pcnt
1765757916	24 'C	600 Pkt	38 Pkt	1.38 Pcnt	81 Pcnt
1765757616	24 'C	590 Pkt	36 Pkt	1.38 Pcnt	81 Pcnt
1765757316	24 'C	590 Pkt	34 Pkt	1.37 Pcnt	81 Pcnt
1765757316	24 'C	590 Pkt	34 Pkt	1.37 Pcnt	81 Pcnt
1765757016	24 'C	590 Pkt	29 Pkt	1.37 Pcnt	81 Pcnt
1765756716	24 'C	590 Pkt	29 Pkt	1.37 Pcnt	81 Pcnt
1765756416	24 'C	600 Pkt	31 Pkt	1.36 Pcnt	81 Pcnt
1765756116	24 'C	600 Pkt	31 Pkt	1.36 Pcnt	81 Pcnt
1765755816	24 'C	620 Pkt	35 Pkt	1.36 Pcnt	81 Pcnt
1765755516	24 'C	600 Pkt	34 Pkt	1.35 Pcnt	81 Pcnt
1765755216	24 'C	610 Pkt	29 Pkt	1.35 Pcnt	81 Pcnt
1765754916	24 'C	600 Pkt	31 Pkt	1.35 Pcnt	81 Pcnt
1765754616	24 'C	600 Pkt	41 Pkt	1.34 Pcnt	81 Pcnt
1765754316	24 'C	590 Pkt	35 Pkt	1.34 Pcnt	81 Pcnt
1765754016	24 'C	590 Pkt	30 Pkt	1.34 Pcnt	81 Pcnt
1765753717	24 'C	590 Pkt	38 Pkt	1.33 Pcnt	81 Pcnt
1765753716	24 'C	590 Pkt	38 Pkt	1.33 Pcnt	81 Pcnt

*Used Equation Coefficients:

Temp.: 0, 0.5, -64

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)